Skip to main content

Appliance Repair hours: Mon to Sat, 8 am to 7 pm

Appliance Repair from $80

5.0 out of 5.Rated 5.0 on Google

5.0 out of 5.Rated 5.0 on Google

Appliance repair

Microwave Repair in St. John’s, NL

Microwave repair in St. John’s starts at $80, for microwaves that run without heating, spark, go dark or stop turning the plate. A HomeBrill technician comes to you, and the quote you get after the diagnosis also shows when a new microwave is the better buy.

  • Starting at $80
  • Mon to Sat, 8 am to 7 pm
  • Samsung, LG, Whirlpool, GE and 11 more brands
  • Call or text, no account needed

Book microwave repair

No account needed. HomeBrill calls or texts you back to set a time for the visit.

Appliance repair starts at $80. After the technician finds the fault, you get a quote for the repair before the work goes ahead. Privacy: see the privacy policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Microwave repair in St. John's: close-up of a microwave door handle, digital display and control buttons, in black and white Microwave repair in St. John's: close-up of a microwave door handle, digital display and control buttons, in black and white

Booking microwave repair in St. John’s

Microwave repairs can be booked for Monday through Saturday, 8:00 am to 7:00 pm, with Sundays closed. Send a text or call (709) 910-9100, or complete the booking form on this page.

Give the brand and model, and say what the microwave does. The label is usually inside the door frame or on the back. Note any code on the display, and say whether the microwave sits on the counter, hangs over the range or is built into a cabinet. Until the visit, do not run a microwave that sparks, smokes or has a damaged door. Do not run it empty either, which strains the magnetron.

Common microwave problems

  • Microwave not heating
  • Microwave won’t turn on
  • Sparks inside the microwave
  • Loud humming or buzzing noises
  • Turntable not spinning
  • Buttons or touchpad not responding
  • Door switch and latch problems
  • Electrical faults and blown fuses

When to stop using a microwave at once

Some faults are a reason to unplug the microwave and leave it unplugged. Stop for sparks that are not from metal left inside, or for smoke or a burning smell. Stop for a door that no longer closes square, or a loud new buzz with food that stays cold. Stop as well if it keeps running with the door open, or starts by itself. Those faults sit in the high-voltage circuit or the door interlocks, which protect you from the microwaves. A plate that will not turn or a dead light can wait for the visit.

What happens on a microwave visit

Before anything inside is touched, the microwave is unplugged and the high-voltage capacitor is discharged, because it can hold a dangerous charge long after the cord is out. The technician then works from the symptom. A dead microwave has its line fuse checked. If the fuse has blown, the door switches are tested too, since a failed switch is the usual reason a fuse goes. A microwave that runs without heating has the diode, capacitor, transformer and magnetron tested with a multimeter, or its inverter board on an inverter model.

An over-the-range unit sometimes has to come down from its wall plate, which takes two people and a clear cooktop below. With the failed part named, you get the quote and decide.

Over-the-range microwaves and the hood above the range

A microwave over the range does a second job as the hood. It has a vent fan, a cooktop light and metal grease filters. Many also have a charcoal filter for a kitchen where the air goes back into the room. The grease filters want washing as often as the manual says, since grease that reaches the fan slows it and drips back. A charcoal filter cannot be washed and is replaced instead.

Where the hood vents outside, a damper flap on the unit keeps cold air out. A flap stuck shut leaves the fan roaring with little draw, and a flap stuck open lets cold air down onto the cooktop in winter.

A microwave in an older St. John’s kitchen

Think of the attached wooden row houses downtown, or Rabbittown, an older neighbourhood of small, closely spaced houses. An older kitchen there may still run its counter outlets on a single circuit. A microwave draws a good deal more power than its cooking wattage suggests. Running it with the kettle on that circuit can trip the breaker with nothing wrong in either appliance.

Try the microwave on its own. If the breaker holds, the circuit is the problem, and adding one is an electrician’s job. If it trips with the microwave running by itself, or the moment a cycle starts, suspect a shorted high-voltage part or a failed door switch. It stays off until it is checked. An over-the-range microwave’s installation instructions usually ask for a circuit of its own, worth knowing before one replaces an old range hood. Stove and oven repair in St. John’s covers the range below it, and the St. John’s appliance repair page the rest of the kitchen.

Faults and parts

Why microwaves fail, and what to check first

HomeBrill repairs microwaves that hum without heating, go dead after a slammed door, throw sparks or leave the plate standing still. Below is what each fault means, when a microwave is worth repairing, and why its cabinet should stay closed.

A microwave is two machines in one box. The low-voltage side runs the display, the lamp, the fan and the turntable. The high-voltage side, a transformer or an inverter board feeding the magnetron, does the heating. When everything lights up and turns but the food stays cold, the trouble is on the high-voltage side. When nothing happens at all, a fuse has usually blown, and it almost always blew for a reason.

Four checks are worth making before you book. Make sure the breaker has not tripped, since a microwave often shares a kitchen circuit with a kettle or a toaster. Open and close the door firmly, and look for food stuck on the latch or the seal. If the keys do nothing, look up the control lock in the manual: many models set it when one key is held down. A new microwave that runs without heating may still be in a shop demonstration mode.

What it is doing, and the usual causes

Lights up and turns, but the food stays cold
The magnetron, the high-voltage diode, capacitor or transformer, or the inverter board on inverter models.
No display, no light, nothing
A blown line fuse, very often after a door interlock or monitor switch failed. A tripped thermal cutout, a control board, or a tripped breaker.
Died after the door was slammed
Bent latch hooks or a broken interlock switch. The monitor switch blows the fuse on purpose when the door switches disagree.
Sparks or flashes inside
Metal in the cavity, a waveguide cover charred by spatter, or chipped cavity paint that leaves bare metal showing.
The glass plate stays still
A failed turntable motor, a coupler worn smooth, or a roller ring off its track.
Keys do nothing, or only some respond
A control lock set by accident, a worn membrane keypad or its ribbon cable, or the control board.
Over-the-range fan or light has stopped
The vent fan motor, the fan switch or a lamp socket. A fan that starts by itself over a hot cooktop is normal.
Trips the breaker as soon as it starts
A shorted high-voltage part or door switch, or a kitchen circuit shared with a kettle or toaster that cannot carry them all at once.

Parts a microwave repair often involves

  • Magnetron Makes the microwaves that heat the food.
  • High-voltage transformer, capacitor and diode Raise the household supply to the thousands of volts the magnetron needs.
  • Inverter board Does the transformer’s job on inverter models.
  • Door interlock switches and monitor switch Keep the microwave from running with the door open.
  • Line fuse and thermal cutouts Cut the power on a short circuit, or when a part runs too hot.
  • Waveguide cover The small panel, often mica, where the microwaves enter the cavity.
  • Turntable motor, coupler and roller ring Turn the glass plate so the food heats evenly.
  • Membrane keypad and control board Read the keys and run the cycle.
  • Vent fan, lamp and thermal switch On over-the-range units, they clear and light the cooktop below.

Pricing

What microwave repair costs

A microwave repair starts at the same $80 as any other HomeBrill appliance repair. The technician finds the fault first. You then get a price for the repair, and the work waits until you agree to it.

On a microwave, the price follows the part and the type. A door switch, a fuse, a coupler, a turntable motor or a waveguide cover is a small part on any model. A magnetron, an inverter board or a control board is a bigger one. On an inexpensive model it can bring the total close to the price of a new unit. A part ordered for one particular model means a second visit to fit it. To ask about a part first, text the model number to (709) 910-9100.

Appliance repair starts at
$80
The repair
Quoted once the technician finds the fault, before the work goes ahead

Brands

Microwave brands HomeBrill repairs

Panasonic and Sharp are long-standing microwave makers. Whirlpool, GE, Frigidaire, Samsung and LG sell over-the-range units to match their ranges, and Bosch and Miele make built-in models framed by a trim kit.

Panasonic’s inverter models use a circuit board in place of the heavy transformer. Two microwaves with the same badge and wattage can use entirely different magnetrons and boards, so read the model number off the label before you call.

Codes help on the brands that show them. On many Samsung microwaves SE means a key on the pad reads as held down, often after steam or a spill has reached the keypad. Panasonic inverter models show H97 or H98 for a heating fault, as the questions below explain. Sharp and Danby countertop models more often show no code at all, so the symptom you describe does the work. Over-the-range units from Whirlpool, GE, Frigidaire, Samsung and LG share a part that wears with use. That is the door switches, which take the strain of a door closed hard many times a day.

  • Samsung
  • LG
  • Whirlpool
  • GE
  • Frigidaire
  • Maytag
  • Bosch
  • Amana
  • KitchenAid
  • Electrolux
  • Kenmore
  • Miele
  • Panasonic
  • Danby
  • Sharp

microwave repair

Why the cabinet stays closed

The parts that make a microwave dangerous to open are the parts that make it work. Its high-voltage capacitor stores a charge that can be lethal, and it can keep that charge long after the cord is unplugged. That is the plain reason microwave repair is not a weekend project.

Do not run a microwave whose door is bent, whose hinge is loose or whose seal is damaged, because the door is part of what keeps the microwaves inside. Three or more switches behind the latch check that the door is shut, and the monitor switch blows the fuse on purpose if the others disagree. A microwave that died the moment its door was slammed is that safety system at work. Do not run it empty: with nothing to absorb the energy, it reflects back into the magnetron. If food catches fire inside, keep the door shut, switch the microwave off, unplug it, and leave it closed until the flames have died out.

Repair or replace a microwave

For a countertop microwave, the sensible answer is often to replace it. When the magnetron or the control board fails on an inexpensive model, the repair can cost about what a new one does. Whether HomeBrill takes on a countertop model at all is a question to ask when you call.

An over-the-range microwave is more often worth repairing. It hangs on a wall plate, bolts up through the cabinet above and serves as the range hood. A new one must match the mounting holes and the venting, and fitting it is an appliance installation job. When the range under it needs attention too, stove and oven repair covers it. Wiping up spatter before it bakes onto the waveguide cover, and washing the grease filters as the manual says, keeps many faults away.

Reviews

The HomeBrill rating on Google

5.0 out of 5.Rated 5.0 on Google

HomeBrill reviews and rating

Microwave repair in the five areas around St. John’s

Microwaves are booked the same way in all six areas. In Kenmount Terrace, one of the city’s newer subdivisions, the microwave often hangs over the range. Microwave repair in Paradise looks at those units, where the microwave doubles as the hood. Ranges, ovens and microwaves in Mount Pearl share a section that starts from the slow wear of a kitchen in daily use. Kitchen appliance repair in CBS adds the salt air that works on the outside cap of a hood duct. The pages for appliance repair in the Goulds and appliance repair in Torbay cover the microwave together with the range and the cooktop.

FAQ

Microwave questions from St. John’s

My microwave buzzes loudly while it heats. Is that a fault?

A steady hum is normal, from the fan and the high-voltage transformer. A loud buzz or a growl that is new, especially if the food heats less than it did, often points to a failing part. That is usually a magnetron near the end of its life or a high-voltage diode. Stop using it until it is checked, since a failing part in that circuit can take others with it.

Why does my microwave spark when there is nothing metal inside?

The usual culprit is the waveguide cover, the small panel on the inside wall where the microwaves enter. Once it is soaked with grease or food it can char and arc. Chipped paint inside the cavity can spark too. Stop using the microwave until it is checked. A new cover is an inexpensive part.

Can a Panasonic or Sharp microwave be repaired?

Yes: Panasonic, Sharp and Danby are among the brands we repair. Give the model number from inside the door frame when you book, since parts such as door switches and magnetrons are made for each series.

Food caught fire in my microwave. Can I keep using it?

Keep the door shut until the flames are out, and unplug the microwave or switch off its breaker. Afterwards, do not use it until it has been looked at, because heat can damage the waveguide cover, the door seal and the wiring behind the cavity.

Why does my microwave shut itself off partway through heating?

Most microwaves carry thermal cutouts that switch them off when a part runs too hot. Usually air cannot get out, because the vents are blocked by a wall or a cabinet or a cooling fan has slowed. On an over-the-range unit, clogged grease filters and the cooktop’s heat add to it. If it stops when the door is bumped instead, a door switch is losing contact. Clear the vents and let it cool. If it keeps stopping, the fan or the cutout needs looking at.

What stops a microwave turntable from turning?

Lift the glass plate and check that it sits on the coupler, the three-pointed piece in the centre, and that the roller ring is clean and on its track. If the plate is seated and still does not move, the turntable motor under the cavity floor has usually failed, or the coupler has worn smooth.

What does H98 mean on a Panasonic microwave?

On Panasonic inverter models, H98 and the related H97 are widely reported to mean the microwave cannot make heat, usually because the magnetron or the inverter board has failed. Check the code in the manual for your model. Switching off and on may clear it for a moment, but it returns while the fault remains.

What is an inverter microwave, and does it fail differently?

An inverter microwave replaces the heavy transformer, capacitor and diode with one circuit board that feeds the magnetron. That board lets it run at a steady lower power instead of cycling on and off. When it fails, the board is one part instead of several, but it is made for its model and usually has to be ordered. The symptoms are the same as on any microwave: it lights and turns but does not heat, or it shows a code.

Book microwave repair in St. John’s

Call, text or send the form, Mon to Sat, 8:00 am to 7:00 pm.