Skip to main content

Painting Services hours: Mon to Sat, 8 am to 7 pm

Painting Services from $80

5.0 out of 5.Rated 5.0 on Google

5.0 out of 5.Rated 5.0 on Google

Painting services

Interior Painting St. John’s

Interior painting in St. John’s is planned room by room. Small rooms have a door or a window in every wall, stairwells and high entries need staging, and on open floors one colour runs into the next. The shape of a room changes the work more than the colour does, and painting with HomeBrill starts at $80.

  • Starting at $80
  • Mon to Sat, 8 am to 7 pm
  • Call or text, no account needed

Book interior painting

No account needed. HomeBrill calls or texts you back to set a time for the visit.

Painting starts at $80. When HomeBrill calls or texts you back, ask about the price of your job before a time is set. Privacy: see the privacy policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Interior painting in St. John's: paint cans, rollers, scrapers and a tub of filler on a plywood subfloor Interior painting in St. John's: paint cans, rollers, scrapers and a tub of filler on a plywood subfloor

Small rooms with a door or a window in every wall

Many St. John’s houses, the downtown row houses among them, have small rooms with a door, a window or a closet in most walls. In a room like that the brushwork of cutting in, along every casing, baseboard and ceiling line, takes a larger share of the time than the rolling. The trim around all those openings is often the bigger part of the job. Trim and baseboard painting in St. John’s covers it. Furniture has little room to go, so a small room is usually emptied rather than worked around.

Older rooms bring their own preparation. Walls and ceilings may be plaster on wood lath. Cracks that run out from the corners of openings are made sound before any colour goes on, the work of plaster repair and painting in St. John’s. The oldest layers are the ones to worry about. Health Canada treats lead as likely in paint put on before 1960 and possible in paint up to 1990. Old layers are tested before anything is sanded, and nothing is burned or heat-stripped.

Rabbittown is a residential neighbourhood in central St. John’s. Its houses are small and closely spaced. Georgestown, just uphill from downtown, is an older inner neighbourhood. Its streets are mostly older attached and row houses. Small rooms like these take more cutting in than open walls.

Stairwells, high entries and sloped ceilings

Some rooms are hard to reach rather than hard to paint. A stairwell climbs past what a stepladder can manage, a newer house may have an entry two storeys high, and a vaulted ceiling slopes away overhead. These need a stair platform, or a plank set between two ladders, and never a ladder standing on a tread. The ceiling goes before the walls and the high wall before the low ones, so drips land on surfaces that are still to be painted.

Ceilings carry a caution of their own. A textured ceiling in a house built before about 1990 may contain asbestos, so it is tested before anyone scrapes or patches it. Ceiling painting in St. John’s covers painting over it.

Open floors where one room runs into the next

Open main floors are common in the newer subdivisions at the city’s west and north edges, and they change the job in three ways. A long wall means a long cut line and a wet edge kept moving from one end to the other. Each wall is finished in one go rather than left half done overnight. Light changes along a long wall, from a window at one end to a dim corner at the other, and shows up any difference in sheen. One product and one sheen run the whole length. And the colours have to stop somewhere sensible, which the questions below cover.

Builder’s flat paint is the usual starting surface in these houses, and the questions below cover repainting over it. Nail pops and corner cracks from the first years of settling are fixed before painting, and on their own they are drywall repair.

What interior painting costs, and booking it

HomeBrill’s painting service starts at $80, and the price of an interior job is set by the rooms themselves: their size and height, and the repairs they need. Say which rooms and surfaces are in the job, how high the tallest wall is, roughly when the house was built and what state the walls are in. Then ask what those rooms would cost to paint. Painting calls and texts to (709) 910-9100 get an answer between 8:00 am and 7:00 pm on weekdays and Saturdays; the form at the top of this page takes the same details.

Paint types and sheens for each room, how a wall is prepared and painted, and the bathrooms, kitchens and apartments that need more care follow further down this page. The painting services page lists all seven painting jobs.

Problems and materials

What goes wrong with interior paint

Interior painting of walls and rooms, from a single bedroom to every room on a floor, with the washing, filling and priming that decide how long the new paint lasts.

Most paint failures on interior walls start under the paint. A wall that looks clean can hold a film of grease, soap or nicotine. An old coat may be oil-based under the latex you plan to use. A basement or bathroom wall may be damp. New paint over any of those lets go, bubbles or shows through, however good the paint.

Walk the rooms in daylight first. Peeling in one room only, such as a bathroom, usually points to moisture. Shiny paint in an older kitchen may be oil-based, and the trim and baseboard painting page explains the simple test for it. Note the holes and cracks, and decide which walls, ceilings, trim and doors are in the job. The rooms of the city’s homes come first on this page, and the painting services page covers the other six painting jobs.

Among Canada’s major cities, St. John’s is commonly cited as one of the wettest. Damp air slows drying, so a bathroom or a basement may need longer between coats.

What you notice, and the usual causes

New paint peeling from a wall
Paint laid over dirt, grease, soap film or a glossy surface without a scuff and a primer, or over a wall that was damp.
Bubbles or blisters in fresh paint
Moisture or heat behind the new film: a steamy room, a damp basement wall, or a wall painted before it was dry.
Cracking or an alligator pattern
Old, brittle layers underneath, or paint put on too thick in one coat.
Patchy colour or shine
One coat where two were needed, or filled holes and new drywall left unprimed.
Lap marks and brush lines
Paint drying faster than it is spread: a dry edge, too little paint, or a warm room with a draft across it.
Mildew spots back within months
A bathroom or basement that stays damp; the moisture is the cause, and new paint only covers it for a while.
Walls that scuff and mark easily
A flat finish in a busy hall or stairway, or paint that has not yet cured.

Materials involved

  • Water-based paint (latex or acrylic) Low odour, dry in hours, cleaned up with water and flexible as it ages; the usual choice for walls.
  • Oil-based paint (alkyd) Dries hard and levels well but slowly, needs solvent to clean up and yellows in low light.
  • Flat and matte Hide surface flaws and suit ceilings and quiet rooms, but mark more easily.
  • Eggshell and satin A soft shine that wipes clean; the usual sheens for living spaces and halls.
  • Semi-gloss and gloss Hard and washable, for kitchens, bathrooms and trim, and they show every flaw underneath.
  • Drywall primer Seals new board and patches so they take paint evenly.
  • Stain-blocking primer Stops water marks, smoke and grease from showing through the topcoat.
  • Mildew-resistant paint Made for damp rooms; it slows growth but is no substitute for an exhaust fan.
  • Masonry primer Prepares dry concrete or block basement walls for paint.
  • Low-VOC paint Gives off fewer fumes while it dries; the room still needs fresh air.

Pricing

What interior painting costs

$80 is where work by HomeBrill’s painters begins. What a room or a house comes to depends on the walls and what they need first. Describe the rooms when you call or text, and ask about the job’s price before a time is set. You can reach HomeBrill about painting on any day except Sunday, from 8:00 am up to 7:00 pm.

The main factors are the size of each room and the height of its walls, and the repairs before painting, from nail holes to cracked plaster. A large colour change may need a primer and an extra coat. The number of colours and sheens counts, as does whether ceilings, trim and doors are included. So do how full the rooms are and any stairwells, which need staging to reach. The painting cost guide sets these out in more detail.

Painting starts at
$80
Your job
Describe it when you call or text, and ask about its price before a time is set

interior painting

Preparation, coats and curing

Preparation takes longer than the painting. Before a roller touches the wall, the room needs its furniture out or gathered in the middle, and pictures and switch plates off. Holes are filled and sanded, gaps along the trim caulked and every patch spot-primed so it does not flash through. Edges are then cut in with a brush and the walls rolled with a wet edge, so the roller never crosses paint that has begun to set.

Paint is dry to the touch within hours but takes days or weeks to cure fully, depending on the product and the room. Until then it marks and scrubs off easily. Keep windows open or a fan running while painting and for a day after. Where a house dates from before about 1990, Health Canada’s guidance on older homes points to testing old paint layers for lead before any sanding. Leftover paint is household hazardous waste: never pour it down a drain, and check your municipality’s drop-off rules.

Basement walls of concrete or block take a masonry primer once they are dry. A wall that sweats or grows a white crust has a moisture problem to solve before any paint goes on.

The city’s houses run from 19th and early 20th century row houses downtown to post-war suburbs and recent subdivisions. Much of downtown went up again after the Great Fire of 1892. Downtown is the historic centre of the city. Older coats in the oldest of these houses may contain lead, so test before sanding.

Bathrooms, kitchens, apartments and single walls

Bathroom painting starts with the moisture. Steam settles on the ceiling and on the wall behind the shower. Paint peels there first where the fan is missing or too weak, and mildew grows in the damp film. The spots are washed off and the surface left to dry before a stain-blocking primer goes on. Then comes a finish made for bathrooms, usually satin or semi-gloss, which sheds water and stands up to wiping.

Kitchen painting starts with the grease. A film of cooking grease, worst above the range, keeps new paint from bonding, so the walls are degreased and rinsed first. Smoke marks are sealed with a stain-blocking primer before the colour goes on.

Apartment painting means painting a lived-in unit, with the furniture moved to the middle and covered and one room finished before the next. For a tenant, the landlord’s written consent and any colour rules are settled first. A single accent or feature wall is a small job of its own, and workplaces have the office and commercial painting page.

FAQ

Interior painting questions from St. John’s

Does builder’s flat paint in a newer house need priming before it is repainted?

Usually not. Once it is washed, builder’s flat paint is a sound base, and a good wall paint can go straight over it in two coats. Primer is needed only where there is something to seal: patches over nail pops, a stain, or a big change from a dark colour to a light one. The gain is a finish that wipes clean, which the original flat paint rarely gives.

Where should one colour stop and the next begin in an open-plan house?

At an edge the eye already reads as a break: an inside corner, the edge of a bulkhead or beam, or the casing of a door or an opening. A colour that stops in the middle of a flat wall looks like a mistake, however straight the line. Where a wall runs unbroken from one space into the next, give it one colour along its whole length and change colour on the walls that meet it.

How soon can a newly built house have its first repaint?

Many owners wait through the first full heating season. As the framing lumber dries, a new house settles, and nail pops and fine cracks at corners and above doors tend to appear in the first year or so. Repainting once they have shown up means they can all be fixed and primed in one round, instead of reappearing through fresh paint.

Can old plaster mouldings and picture rails be painted without losing their detail?

Yes, with care. In an older house, many coats over the years may already have softened the crisp edges of a cornice or a ceiling medallion. Each new coat should be thin and brushed on, not rolled. Stripping the build-up brings the detail back, but the old layers may contain lead, so have them tested before anything is scraped, sanded or heated.

What sheen of paint goes in which room?

Matte or eggshell for living rooms and bedrooms, where a low shine hides flaws. Satin or semi-gloss for kitchens and bathrooms, which need to be wiped, and semi-gloss or gloss for trim and doors. Ceilings are almost always flat.

Why is fresh paint peeling off an old wall?

The new coat never gripped what was underneath. The wall may have been dirty, greasy or glossy when it was painted, or damp. In older houses, an oil-based coat under the new latex is a common cause; the trim and baseboard painting page explains how to test for it.

Do kitchen walls have to be washed before painting?

Yes, even when they look clean. Cooking leaves a thin film of grease on kitchen walls that new paint will not grip. Wash them with a degreaser, rinse with clean water and let them dry before any primer or paint goes on.

How many coats does a room usually need?

Two, as a rule: the first covers and the second evens out the colour and sheen. New drywall, patched walls and a strong change of colour, such as pale over dark, also need a primer before those two coats.

Book interior painting in St. John’s

Call, text or send the form, Mon to Sat, 8:00 am to 7:00 pm.